5 Tips To Help You Keep Your Conveyor Chains Operational

Conveyor chains are used to drive different types of conveyor units and use different types of power transmission. If you want to get the most out of your equipment, make sure you maintain them. This is even more important if they are installed in the mining and construction industry. Given below are a few tips that can help you ensure your conveyor chains will continue to work properly.

1. Follow the Maintenance Schedule

First of all, you may want to inspect and service them to ensure proper alignment, lubrication and tension. If inspected on a regular basis, they can last up to 15,000 hours. It’s better if you schedule filter and oil changes every 3 months. On the other hand, the cleaning of bigger parts, such as shafts, machine lubrication and replacement of damaged or worn sprockets and sideplats should be done on an annual basis.

Following the maintenance schedule is paramount, especially if you have installed the conveyor chains in the construction and mining industry.

2. Lubricate Wisely

For smooth operation, conveyor drives and chains should be free of moisture and dust. Most of these systems require petroleum-based oil. It’s not a good idea to opt for heavy greases and heavy oils. The reason is that they are overly stiff and can’t lubricate the system properly. Given below are some common ways of lubricating the conveyor chains. Some of them are listed below:

Stream lubrication
Disk lubrication
Drip lubrication
Manual lubrication

Based on the power and chain speed, the right method can be used. For reducing wear and tear and enjoying all the benefits, it’s important that you lubricate the system properly.

3. Get Heat-Treated Parts

Heat treatment can be used to improve the mechanical components. Therefore, manufacturers control the treatment methods for best results. In other words, to reduce wear and tear, it’s important to perform proper heat treatment.

Case hardness and depth are the two primary parts of component heat transfer. This plays a great role as far as resistance and durability is concerned. If the depth is too much, the parts may break while working due to brittleness.

4. Make sure there is Proper Alignment and Tension

Make sure you check the slack span and chain tension, and perform the required maintenance. If you need to reduce the tension, you can eliminate two pitches and then connect the chain again. However, you may need to replace the entire chain if the wear and tear goes beyond the functional limits.

Also, you may not want to connect new chains to the worn one as it can damage the drive. Misaligned sprockets can also cause the link plates of the roller chain to get a lot of wear and tear.

5. Check the Primary Parts

Typically, conveyor chains have two main parts that go through wear and tear: sprockets and chain. Chain stretching happens due to this very reason and results in the complete replacement of the sprockets and chain.

Therefore, you should inspect conveyor chains for any broken parts, deformation and cracks.

In short, these are the tips you can follow to maintain your roller chains.

Get a Student Education Loan to Complete Your Study

Education is of prime importance in our lives. Although, Government of India has made education free and compulsory up to 14 years of age; it is getting extremely expensive to get quality education. The scholarships offered by esteemed universities are very few in comparison to the many hopeful and deserving applicants. Due to the expenses, eager minds of these students are left unbridled. But all’s not bleak and gloomy, in fact, now the situation is quite the contrary. Education in India is thriving thanks to student education loans provided by many government and private banks. Let’s take a look at some of the features of student education loans.

Eligibility
Generally, education loans are provided to students of Indian nationality within the age group of 15-30 years. Another requisite of it is that the student applying for the loan must have a working parent or a guardian to be the guarantor. The loan approval will be based on the capability of the borrower and the guarantor’s assets, liabilities, income, etc. Also, the student must hold a good academic record and he/ she should have secured admission by clearing the necessary entrance examinations for that course.

Courses
One can benefit from the student education loan for courses in India which are approved by the state and central government as well as courses from foreign universities. The nature of the course and the reputation of the university may be checked by the bank providing the student education loan. The student education loan covers tuition fees, library, hostel, as well as other expenses of books, uniforms, travel, etc.

Loan Limit
The maximum loan limit for studies in India is Rs. 10 Lac and the maximum loan limit for studying abroad is Rs. 20 Lac. If the loan is for Rs. 4 Lac and above, then 5% of the margin is applied for studies in India and 15% for studies abroad. For loan up to Rs. 4 Lac, there are no security requirements. However, if the loan amount is higher than that, then one has to provide some like property, LIC policies and Government securities. Many institutes have tie-ups with banks thereby providing lower rates. Also, some banks offer lower rates to female students.

Repayment
The repayment option for a student education loan is very flexible. Usually, one has to start paying the EMIs after the completion of the course but in case the student does not get a job then a grace period of 6-12 months is offered. In the due time, if the student gets employment then he has to start the EMI payments. The period of repayment varies from bank to bank. It can be from anywhere between 3-15 years.

These days almost every bank offers student education loan, so you will have a wide range of plans to choose from and get the best one according to your needs and requirements. This loan assists the youth of our nation in pursuing their aspirations. So, the next time your son or daughter tells you of their dreams, you know how to make them come true!

How to Obtain Private Education Loans

It is not unusual to find students short on cash needed to pay for their education. While the government can provide some financial help by letting students borrow money through one of its programs, some will find this quite limited, and will want to borrow some more. This is where private education loans come in, helping the students to cover for the cost that a federal student loan just isn’t enough.

Private education loans, as the name suggests, are offered by non government lenders. There is also no need to sign federal forms in order to completely process a loan. However, the eligibility of a student is almost always evaluated by their credit score, so if you have a good credit score, he more eligible you are likely to be. One should maintain a credit score of at least 650

People who use private education loans are usually families and students that are unable to complete payment for education in full due to insufficient cash even with the federal loan. Some simply choose private education loans because of better flexibility when it comes to repayment options. With federal loans, you won’t be able to defer the repayment after graduation, while some private education leads have that option. While some interest may accumulate, this spares the borrower from worrying about paying off the loan and focuses his expenses on other matters until graduation.

It is recommended that when applying for a private loan, one should apply with a cosigner, even if he or she is eligible alone. Having a cosigner helps by marginally lowering rates. The rate of interest as well as the fees needed to pay on a private education loan is also based on both the borrower’s and the cosigner’s credit score. If the cosigner’s credit score is better than the borrower, it can significantly lower the interest rate.

Some private lenders can offer education loans bigger than what is needed to attend school. However, this “excess” amount is treated as a resource. It ill cut down the need-based aid, similar to what happens in outside scholarships. Fortunately, this is only true in education loans, or loans that require enrollment in a certain college. This applies regardless of where the loan is directly received by the borrower or by the school. This limitation does not apply to mixed-used loans like credit cards or equity loans, which does not factor in cost required for attending college.